Find a Dealer Become a Dealer
0
  • No products in the cart.
mobile logo
0
  • No products in the cart.
Find a DealerBecome a Dealer

ProFoam™

ProFoam™ Tractor Cleaner

The Next Generation Foam Cleaner for Agricultural Equipment

ProFoam™ is a next generation foam cleaner engineered specifically for tractors, farm equipment, and heavy machinery.

Built from years of use in demanding agricultural conditions, ProFoam delivers longer cling time, stronger foam stability, lower use rates, and more consistent cleaning performance.

Unlike traditional foam cleaners that slide off or dry too quickly, ProFoam stays wet longer so the chemistry can continue working across the entire machine.

Foam the entire machine. Let it work. Rinse it clean.

This is the next step forward in tractor and equipment cleaning.

Find a DealerBuy ProFoam™

https://www.youtube.com/watch?v=q4KvlsGr290

ProFoam™ – The Next Step Forward.

ProFoam™ is:

  • Built for tractors, combines, sprayers, and heavy equipment
  • Designed for full-machine foaming
  • Engineered for brushless cleaning
  • Built for real-world agricultural conditions

Buy ProFoam™

Looking for T&T Cleaner?
See how ProFoam™ compares in real-world testing.

Compare ProFoam™ vs T&T Cleaner

The Problem with Traditional Foam Cleaners

Foam cleaning became the standard because it made tractors and equipment faster and easier to wash.

But after years of use in agricultural environments, the same problems continued to appear with traditional foam cleaners.

These limitations reduce efficiency and make cleaning large agricultural equipment more difficult than it should be.

See how ProFoam™ solves these issues in side-by-side testing.

Watch Real-World ProFoam™ Comparisons

https://youtu.be/Jugav0CBOnc?si=gNL3TDOdzfuK75Gf

Operators constantly dealt with:

  • Foam sliding off before it could fully work
  • Products drying too quickly in heat and sunlight
  • Streaking and residue from rapid drying
  • Inconsistent cleaning across large equipment
  • Section-by-section washing to avoid drying
  • Increased brushing and labor
  • Polished metals being tarnished
  • Winter salt not being properly neutralized

Buy ProFoam™

Why ProFoam™ Was Created

ProFoam was developed to solve the limitations operators experienced with traditional foam cleaners used across agriculture and heavy equipment industries.

Instead of modifying an existing product, Protect Systems developed a completely new foam chemistry focused on:

• Longer dwell time
• Improved cling stability
• Lower use rates
• Better surface safety
• Cleaner rinsing performance
• More consistent real-world cleaning performance

The goal was simple. Build a foam cleaner for tractors and agricultural equipment that stays active longer and performs better in demanding conditions.

How ProFoam™ Works

The performance difference with ProFoam™ starts with dwell time and foam stability.

Instead of rapidly sliding off or drying out, ProFoam™ stays active on the surface so the chemistry can continue breaking down dirt, grease, rubber residue, and road film.

This longer working window allows operators to foam larger areas and achieve more consistent cleaning results in less time.

In side-by-side testing:

  • Traditional foam cleaners were nearly gone within a few minutes
  • ProFoam™ remained active for 20 to 30 minutes or longer in the same conditions

As ProFoam™ dwells, the foam often begins turning brown on tires and heavily contaminated surfaces.

That brown-out effect is contamination being lifted from the surface during dwell time.

https://www.youtube.com/watch?v=qMblD91gRG0

Built for Full-Machine Cleaning

Most foam cleaners force operators to wash tractors and equipment in small sections because the product dries too quickly.

ProFoam was engineered to allow full-machine foaming under normal conditions.

Its extended cling time allows operators to foam combines, sprayers, tractors, and large equipment before rinsing begins.

That means less rushing, better coverage, reduced labor, and more consistent cleaning results across the entire machine.

Key Benefits:

  • Less rushing during washing
  • Better coverage across large surfaces
  • Reduced labor and brushing
  • More consistent clenaing results

This becomes especially important on combines, sprayers, tractors, and large equipment where traditional cleaners can dry before rinsing begins.

Buy ProFoam™

Lower Use Rate. Higher Efficiency.

ProFoam is engineered to clean effectively at very low concentrations.

Typical use rate is approximately 1–2% through a foam cannon or foamer.

At these dilution rates, a single 5-gallon container can clean approximately 110 pickup trucks or large amounts of agricultural equipment depending on application methods and contamination levels.

Lower product consumption combined with improved cleaning performance helps reduce cost per wash while improving overall efficiency.

ProFoam is available in 5 gallon and 55 gallon containers

Buy ProFoam™

Cleaning and Degreasing in One Product

ProFoam can be used as both a standard foam cleaner and a heavy-duty degreaser.

For standard equipment washing:

  • Use approximately 1–2%

For grease, oil, and heavy buildup:

  • Use 10–25% in a pump sprayer

This makes ProFoam effective for:

  • Engines
  • Undercarriages
  • Hydraulic leaks
  • Tire cleaning
  • Heavy grease buildup

The ability to handle both routine washing and heavy contamination allows one product to replace multiple cleaners.

Safe on Agricultural Equipment Surfaces

ProFoam is designed for the materials commonly found on tractors and heavy equipment.

It can be safely used on painted surfaces, chrome, stainless steel, plastics, rubber, and most polished aluminum surfaces when used properly.

Unlike many traditional foam cleaners, ProFoam is built without unnecessary dyes or fragrances that can interfere with rinsing and surface performance.

For polished aluminum, we recommend pre-rinsing before application and testing in a small area due to variations in aluminum quality and finishes.

It can be safely used on:

  • Painted surfaces
  • Chrome
  • Stainless steel
  • Plastics
  • Rubber
  • Polished aluminum surfaces

Buy ProFoam™

Built for Real Agricultural Equipment

ProFoam is engineered specifically for agricultural and heavy equipment cleaning.

It is designed for the conditions tractors and equipment experience every day.

Heat. Dust. Grease. Rubber residue. Road film. Heavy buildup.

This is not a light-duty vehicle soap adapted for agriculture.

It is a professional foam cleaner for tractors and agricultural equipment designed specifically for combines, sprayers, planters, semis, and heavy machinery.

Equipment Types

  • Tractors
  • Combines
  • Sprayers
  • Planters
  • Heavy equipment
  • Trucks and pickups
  • Off-road vehicles
  • Farm service equipment

Find a Local Dealer

Buy ProFoam™

How to Use ProFoam™

Application Instructions:

  1. Pre-rinse heavy dirt and mud.
  2. Pour undiluted cleaner concentrate into the foam kit canister.
  3. Apply foam with cold water and adjust the foam kit dial for shaving cream thick foam (1% to 2% is recommended).
  4. Let ProFoam soak for several minutes, making sure to not let the foam dry or slide off the surface. ProFoam can stay wet and cling to the surface for up to 30 minutes or longer depending on the temperature and humidity.
  5. Wash from the bottom up with a green or yellow nozzle using hot or cold water, followed by a top-down rinse.
  6. Thoroughly rinse a second time, making certain that no foam residue remains.

Buy ProFoam™

ProFoam Tips:

  • ProFoam allows the entire machine to be foamed at once under normal conditions.
  • Cool extremely hot surfaces by pre-rinsing with water before applying ProFoam.
  • Use Protect System’s Ceramic Rinse foaming protectant to reduce water spots.
  • Pre-rinse aluminum before applying ProFoam and wash quickly for best results.
  • We recommend testing polished aluminum in a small area.
  • Degreaser – Mix at 10%–25% in a pump sprayer.

Recommended Equipment Setup

  • Pressure washer: 1200–3000 PSI
  • Water flow: 2.5–5 GPM
  • Foam cannon: Protect Systems Pro Foamer
  • Foam application: Cold water
  • Washing/rinsing: Hot or cold water

Recommended Products:

Shop Cleaning Products

Built for the Clean. Polish. Protect. System

The First Step

ProFoam is the first step in the complete Protect Systems equipment care process.

  1. Clean with ProFoam
  2. Protect with Ceramic Rinse
  3. Long-Term Protection with Protect Ceramic Coatings

Better cleaning improves every step that follows.

Find ProFoam™ Near You

ProFoam is available through authorized Protect Systems dealers across North America.

Find a Dealer Become a Dealer

Buy ProFoam™ 

Choose the right ProFoam™ size for your operation.

  • ProFoam™ 5 Gallon
  • ProFoam™ 55 Gallon

Buy ProFoam™ Find a Dealer

Frequently Asked Questions

What is the best foam cleaner for tractors?

ProFoam is specifically designed for agricultural equipment and delivers longer cling time, deeper cleaning, and lower usage rates compared to traditional foam cleaners.

Can tractors be washed without brushing?

Yes. In many applications, ProFoam significantly reduces or eliminates the need for brushing when used properly.

How long should foam dwell on equipment?

Most cleaning occurs within the first few minutes, but ProFoam is engineered to remain active much longer than traditional cleaners, especially indoors or in controlled conditions.

Is ProFoam safe on polished aluminum?

Yes, when used correctly. Pre-rinsing aluminum before application is recommended.

Where can I buy ProFoam?

ProFoam is available through authorized Protect Systems dealers and directly through our website where supported.

Upgrade to ProFoam™

Stop wasting time with foam that slides off and dries too fast.

Upgrade to ProFoam™.

Buy ProFoam™ Find a Dealer

Still researching foam cleaners?

Compare ProFoam™ vs T&T Cleaner and see real-world testing results.

Compare ProFoam™ vs T&T Cleaner