Description

Foam-On Ceramic Protection Made Easy

Ceramic Rinse 1 Gallon by Protect Systems is a next-generation foaming ceramic protectant designed specifically for agricultural and heavy equipment.

Applied through the Pro Foamer Foam Cannon, Ceramic Rinse creates a slick hydrophobic layer that helps water bead aggressively, run off quickly, improve shine, and reduce water spotting on painted equipment surfaces.

Simply foam it on after washing, allow it to dwell briefly, and rinse it away.

No wiping required.
No complicated ceramic coating process.
No additional polishing steps.

Ceramic Rinse is one of the easiest ways to protect tractors, combines, sprayers, semis, and heavy equipment after washing.

Built to Work with ProFoam™

Ceramic Rinse 1 Gallon was engineered to work alongside ProFoam™ Foaming Cleaner as part of a complete cleaning and protection system for agricultural equipment.

First wash the equipment with ProFoam™. Then apply Ceramic Rinse directly to the wet surface using a second foam cannon.

ProFoam™ removes contamination.
Ceramic Rinse adds protection and shine.

Together they create one of the fastest and easiest equipment maintenance systems available today.

Recommended Products

• ProFoam™ Tractor Cleaner
• Pro Foamer Foam Cannon
• Ceramic Rinse 5 Gallon

Extreme Water Beading and Fast Water Runoff

Large painted equipment surfaces often allow water to sheet across the panel and dry slowly, leading to water spots and mineral buildup.

Ceramic Rinse changes the behavior of water on the surface.

Immediately after application, water begins to bead tightly and run off quickly before it has time to dry.

The slick ceramic layer helps:

• Reduce water spotting
• Improve water runoff
• Increase gloss and shine
• Make future cleaning easier
• Help reduce dirt and contamination buildup

Video Demonstration

[EMBED CERAMIC RINSE APPLICATION AND WATER BEADING VIDEO HERE]

Exceptional Cling and Easy Rinsing

Ceramic Rinse clings extremely well to painted and vertical surfaces during application while still rinsing clean and easily.

Users consistently comment on how well the product stays in place without rapidly drying during use.

Once rinsed, water instantly beads and runs away from the surface.

Ceramic Rinse Helps Maintain Ceramic Coatings

Ceramic Rinse was developed as a maintenance rinse for equipment protected with Protect Ceramic™ Paint Pro EVO and Protect Ceramic Tire & Trim ceramic coatings.

It helps maintain hydrophobic performance, improve gloss, refresh slickness, and extend the life of professionally coated equipment.

Ceramic Rinse is also an excellent stand-alone protection option for operators who do not want to apply wipe-on maintenance products like Prolong Ceramic Maintenance Spray after every wash.

Safe Across Multiple Surfaces

Ceramic Rinse can be safely applied to:

• Paint
• Polished aluminum
• Stainless steel
• Plastic trim
• Glass and windows
• Tractors
• Combines
• Sprayers
• Heavy equipment
• Semis and trailers

The formula is:

• 100% biodegradable
• Non-corrosive to metals
• Easy rinsing
• Low usage rate
• Safe for routine maintenance

Extremely Low Usage Rate

Ceramic Rinse is highly concentrated and designed for efficiency.

Pour the concentrate directly into the Pro Foamer Foam Cannon and typically set the dial to approximately 2.

One 1-gallon bottle can typically treat approximately:

• 12 to 15 large FWA tractors

depending on application style and equipment size.

Ceramic Rinse 1 Gallon - How to Apply

Application Instructions

1. Wash the equipment thoroughly using ProFoam™ or your preferred cleaner.
2. Leave the surface wet after washing. Do not dry.
3. Pour Ceramic Rinse directly into the Pro Foamer foam cannon. Do not dilute.
4. Set the foam cannon dial to approximately 2.
5. Foam Ceramic Rinse evenly across the entire surface.
6. Ensure full coverage without excessively heavy foam application.
7. Allow the product to dwell briefly as the foam begins to collapse.
8. Rinse thoroughly until all product is removed.
9. Dry remaining water with air or a soft microfiber towel if desired.

Important

• Do not allow Ceramic Rinse to dry on the surface.
• It is always best to prevent water from drying on equipment surfaces.

Suggested Buttons:

[ SHOP 1 GALLON ]

[ SHOP 5 GALLON ]

[ FIND A DEALER ]

Recommended Accessories

Ceramic Rinse works best with a dedicated foam cannon setup.

We strongly recommend using a second Pro Foamer foam cannon specifically for Ceramic Rinse applications. This allows operators to quickly switch between cleaning and protection without emptying or changing products during the wash process.

Extra tanks are available, but a second complete foam cannon is typically the easiest and fastest solution.

Suggested Buttons:

[ BUY A SECOND FOAM CANNON ] - https://protectsystems.com/product/pro-foamer-ls10-1-8mm/

[ SHOP EXTRA TANKS ] - https://protectsystems.com/product/2-liter-tank-for-pro-foamer/

Available Sizes

Ceramic Rinse is available in:

• 1 Gallon Jug
• 5 Gallon Jug

Available through authorized dealers and the Protect Systems Online Store.

Suggested Buttons:

[ BUY CERAMIC RINSE 1 GALLON ]

[ BUY CERAMIC RINSE 5 GALLON ]

Complete Your Equipment Care System

Protect Systems offers a complete system for cleaning, polishing, and protecting agricultural equipment.

Recommended System

Step 1 — Clean

ProFoam™ Foaming Cleaner

Step 2 — Protect

Ceramic Rinse Foaming Ceramic Protectant

Step 3 — Long-Term Protection

Protect Ceramic Coatings

Related Product Links:

• ProFoam™
• T&T Cleaner
• Pro Foamer Foam Cannon
• Protect Ceramic Paint Pro EVO
• Protect Ceramic Tire & Trim
• Prolong Ceramic Maintenance Spray

Ceramic Rinse 1 Gallon

Fast Protection. Less Labor. Better Results.

If you already use ProFoam™ or T&T Cleaner, Ceramic Rinse is the next step in building a complete equipment care system.

Clean it.

Protect it.

Maintain it the easy way.